Our model 4050 is a powerful suction blasting cabinet for all commercially available abrasives. The work pieces can be put into the cabinet via two side loading doors.
Two integral gloves which are padded on the inside and coated with rubber on the outside provide a comfortable arm support.
A large window allows unhindered insight into the cabinet. Within the cabinet, good and consistent illumination prevails due to the dust-proof tubular lamp made of duran glass (borosilicate glass) with ballast and PL lamp 36 W.
By a flexible hose, the blasting cabinet is connected to a separate dry extraction unit of the type AE-T 0,5. The extraction unit consists of a ventilator, a filter chamber with a pocket filter, a supporting frame, a manual cleaning mechanism and a dust drawer. The dusty air is cleaned within the pocket filter and afterwards released into the atmosphere.
On demand, the blasting cabinet can be equipped with a unit for cleaning the abrasive material (cyclone). The cyclone 600 shown on the photo on the left side (cleaner for abrasive material 16,8 m³/min., 1,1 kW) consists of a ventilator, precleaner, filter and collection hopper for abrasive material and is equipped with a filling and a cleaning flap. Within the cyclone the blasting dust is already separated from the abrasive material and transported to the filter box. The air is cleaned inside the filter box and released to the work space whereas the cleaned abrasive material is led back to the working circuit.
| Technical data of the blasting cabinet | |
| Overall size | W 1610 mm x D 1070 mm x H 1720 mm |
| Blasting chamber | W 1485 mm x D 995 mm x H 940 mm |
| Weight | appr. 190 kg |
| Varnish | grey / blue (Extra charge for special lacquering) |
| Compressed air connection | ½" hose |
| Compressed air demand | see Air Table |
| Blasting gun | works according to the venturi principle with hardened nozzle or carbide metal nozzle |
| Window | 480 x 300 mm (Safety glass pane with foil that can be glued in) |
| Electrical connection | 16 A / 400 V |
| Technical data of the extraction unit | |
| Overall size | W 810 mm x D 685 mm x H 1360 mm |
| Weight | appr. 100,5 kg |
| Aspiration port | Ø 100 mm |
| Motor | 0,55 kW / 400 V / 50 Hz / 3000 U/min. / 1,38 A |
| Electrical connection | 400 V |
| Varnish | grey / blue |
| Filter material | polyester needle-felt |
| Size of filter | 5,0 m² |
| Air output | 1000 m³/h (Ventilator output) |
| Compression | 1150 PA |
| Fan impeller | Ø 180 mm x 85 mm height |
| Residual dust content | appr. 1,0 mg / m³ (differs according to abrasive used) |