The model 2642/7 is a powerful suction blasting cabinet with blasting material circulation for commercially available abrasives.
The work pieces can be put into the cabinet via two side loading doors. Two integral gloves which are padded on the inside and coated with rubber on the outside provide a comfortable arm support.
A large window allows unhindered insight into the cabinet. Within the cabinet, good and consistent illumination prevails due to the dust-proof tubular lamp made of duran glass (borosilicate glass) with ballast and PL lamp 24 W.
By a flexible hose, the blasting cabinet is connected to a separate extraction unit of the type AE-T 0,5. The dusty air is cleaned within the pocket filter and afterwards released into the atmosphere. The extraction unit consists of a ventilator, a dust drawer, a manual cleaning mechanism and a filter chamber with a pocket filter.
| Technical data of the blasting cabinet | |
| Overall size | W 1200 mm x D 760 mm x H 1720 mm |
| Blasting chamber | W 1070 mm x D 675 mm x H 940 mm |
| Weight | appr. 125 kg |
| Varnish | grey / blue (Extra charge for special lacquering) |
| Compressed air connection | ½" hose |
| Compressed air demand | see Air Table |
| Blasting gun | works according to the venturi principle with hardened nozzle or carbide metal nozzle |
| Window | 480 x 300 mm (Safety glass pane with foil that can be glued in) |
| Electrical connection | 16 A / 400 V |
| Technical data of the extraction unit AE-T 0,5 | |
| Overall size | W 810 mm x D 685 mm x H 1360 mm |
| Weight | appr. 100,5 kg |
| Aspiration port | Ø 100 mm |
| Motor | 0,55 kW / 400 V / 50 Hz / 3000 U/min. / 1,38 A |
| Electrical connection | 400 V |
| Varnish | grey / blue |
| Filter material | polyester needle-felt |
| Size of filter | 5,0 m² |
| Air output | 1000 m³/h (Ventilator output) |
| Compression | 1150 PA |
| Fan impeller | Ø 180 mm x 85 mm height |
| Residual dust content | appr. 1,0 mg / m³ (differs according to abrasive used) |